基于NCL30001和NCS1002的高達28 V、3.3 A恒流離線高功率因數LED驅動器設計筆記
This Design Note (DN) is an extension to ON Semiconductor’s Application Note AND8427/D and illustrates how the NCL30001 continuous conduction mode power factor corrected single stage flyback controller can be used to implement a constant current LED driver for area lighting applications such as high bay, tunnel, parking garage and roadway lighting.This specific design has been optimized for LEDs that require greater than 3A drive capability such as the Luminus Devices CSM360 and SST90. This design can support up to 8 SST90 devices in series or 2 CSM360. The CSM360 LED has a nominal forward voltage of 12.8 V at a drive current of 3.2A and depending on the color temperature and flux bin can generate 1600-3900 lumens.
采購指南
更多>>特別推薦
- 噪聲中提取真值!瑞盟科技推出MSA2240電流檢測芯片賦能多元高端測量場景
- 10MHz高頻運行!氮矽科技發布集成驅動GaN芯片,助力電源能效再攀新高
- 失真度僅0.002%!力芯微推出超低內阻、超低失真4PST模擬開關
- 一“芯”雙電!圣邦微電子發布雙輸出電源芯片,簡化AFE與音頻設計
- 一機適配萬端:金升陽推出1200W可編程電源,賦能高端裝備制造
技術文章更多>>
- 工業機器人功能安全:從風險到韌性
- Power Integrations 推出 CAPZero-4 X 電容放電 IC,大幅降低電源空載與待機功耗
- TDK 推出 M704/M705 高壓 NTC 溫度傳感器,面向充電樁、光伏、數據中心電源
- 邁來芯 MLX92342 兩線無 PCB 霍爾開關發布,適配車載區域架構、安全帶扣安全檢測
- 英飛凌 electronica 2026:物理 AI 賦能機器人、汽車與算力基建
技術白皮書下載更多>>
- 車規與基于V2X的車輛協同主動避撞技術展望
- 數字隔離助力新能源汽車安全隔離的新挑戰
- 汽車模塊拋負載的解決方案
- 車用連接器的安全創新應用
- Melexis Actuators Business Unit
- Position / Current Sensors - Triaxis Hall
熱門搜索
ntc熱敏電阻
OGS
OLED
OLED面板
OmniVision
Omron
OnSemi
PI
PLC
Premier Farnell
Recom
RF
RF/微波IC
RFID
rfid
RF連接器
RF模塊
RS
Rubycon
SATA連接器
SD連接器
SII
SIM卡連接器
SMT設備
SMU
SOC
SPANSION
SRAM
SSD
ST



